This directional panel antenna is designed for indoor use. The antenna is broadband and covers both 2G, 3G and 4G networks and WLAN systems for GSM, DCS, UMTS and LTE.
It is a high-amplification antenna of 7-9 dBi, suitable for signal transmission over large surfaces. The inner antenna is waterproof and compatible with all Huaptec signal amplifiers
€115.00 Incl. BTW: €139.15
The HiBoost panel pro set is suitable if you want to improve the signal in a given area, because the panel antenna emits the signal in one direction.
With this set you have all the components to extend the mobile phone signal amplifier with a panel antenna.
1 Inside panel antenna (indoor).
1 Coax cable 5D-FB cabel 10 meters from mobile phone amplifier to internal antenna.
2 N-Female connectors pre-mounted.
| Frequency Range | 698-806/806-960/1710-2700MHz |
| Gain | 5±0.5/6±0.5/7±0.5dBi |
| Polarization | Vertical |
| Horizontal Beamwidth | 80°/80°/65° |
| Vertical Beamwidth | 73°/70°/60° |
| Front-To-Back Ratio | > 8/> 10/> 15 |
| VSWR | ≤1.8 |
| PIM, 3rd Order, 2 x 2 W | ≤-140dBc |
| Input Impedance | 50Ω |
| Maximum Power | 50W |
| Connection Type | N-Female |
| Weight | 0,38 kg |
| Dimension | 180*170*60mm |
| Lighting Protection | DC Ground |
| Mounting Kit | On-wall |
| Operational Temperature | -55 to +60℃ |
| Color | White |
| Algemene karakteristieken | |
| Innerlijke dirigent | BC |
| Dirigent Dia. | 1.12 +/-0.02 mm |
| Min. Break Strength | 453 N |
| Isolatie | Foam P.E |
| Isolatie Dia. | 2.95 +/-0.15 mm |
| Kleur | White |
| Centricity | ≥ 85% |
| adhesie | 10 to 100N @ 25 mm |
| afscherming | AL/P-Foil (Bonded) |
| Folie overlapt | ≥ 120 % |
| Buitenste geleider | TC Wire Braid |
| Coverage | 90 +/-3% |
| Jas | FR-PVC |
| Outer Dia. | 4.95 +/-0.15mm |
Mechanische eigenschappen | |
| Min. Buigstraal: | |
| Installatie | 12.7 mm |
| Herhaald | 50.8 mm |
| Max. Trekken | 245 |
| Verbrijzelingsweerstand van kabel (belasting van 700N) | < 1 % |
| Nominale temperatuur | |
| Opslag / bedrijfstemperatuur | -40~+85℃ |
| Installatie buitenshuis | -40~+85℃ |
Elektrische kenmerken | |
| Impedantie | 50± 2 ohm |
| Capaciteit | 78pF/m |
| Velocity ratio | 84% |
| DCR: interne geleider | < 17.6 ohm/km |
| DCR: buitenste geleider | < 16.1 ohm/km |
| Jack Sparker | 3000 V RMS |
| Diëlektrische sterkte | 1000 V DC |
| Isolatieweerstand | > 10,000МΩ·km |
| Piekvermogen | 2.5 KW |
| Afschermingseffectiviteit | >90 dB |
| VSWR | 30-2500 MHz <1.20 |
| Verzwakking (bij 20 ℃) | dB/100m |
| 30MHz | 5.80 |
| 50 MHz | 7.50 |
| 150 MHz | 13.10 |
| 220 MHz | 15.90 |
| 450 MHz | 22.80 |
| 900 MHz | 32.60 |
| 1500 MHz | 42.40 |
| 1800 MHz | 46.60 |
| 2000 MHz | 49.30 |
| 2500 MHz | 55.40 |
| 5800 MHz | 86.50 |
| De maximale verzwakking is 10% hoger. |
Installatie is gelijk aan de montage van de initiële set en behoeft geen verdere uitleg.
Als u een kabel gebruikt die langer is dan die uit uw set, denk er dan aan dat uw booster vermogen kan verliezen en een slechtere signaalversterking kan bieden